Getting Started; Prepare The Remote Control - Anker Nebula Astro Manual Del Usuario

EN

Getting Started

1. Placement
Place Nebula Astro on a stable, flat surface in front of the projection surface. For the
best results, the projection surface should be white and flat. The distance between
Nebula Astro and the projection surface must be a minimum of 0.58 meters (23
inches) and a maximum of 3.08 meters (121 inches) to get a projection image between
20 and 100 inches.
• It is unnecessary to tilt Nebula Astro towards the projection surface.
T
• The distance between Nebula Astro and the projection surface

2. Prepare the Remote Control

The remote control comes with two AAA batteries.
① Slide down to open the battery compartment.
② To replace the batteries, slide to open the battery compartment, insert new batteries
(matching the polarity (+/-) indicated), and close the battery compartment.
09
You can correct the projection image with the built-in keystone
correction.
determines the projection image size. For the best result, position it
between 40 and 80 inches away from the projection surface.