Settings - Anker Nebula Astro Manual Del Usuario

Settings

Go through the setup process when you power on Nebula Astro for the first time.
Determine the distance range to trigger Eye Guard, set your name, birthday, and
password.
1. Network
This projector can be connected to the Internet via a wireless (Wi-Fi) connection.
① Select
to access the Settings page. Select [Network] and press
② Follow the on-screen instructions to complete the network connection.
2. Bluetooth
Bluetooth Speaker Mode
You can use this projector as a standalone Bluetooth speaker.
① Press
to switch to Bluetooth speaker mode.
② Enable Bluetooth on your smartphone and select [Nebula-XXXXXX] as the device to
be connected.
Projector Mode
You can connect a Bluetooth speaker or pair of headphones to Nebula Astro while in
projector mode.
① On the home menu, select
press . Enter the password if needed.
② Follow the on-screen instructions to complete the Bluetooth connection.
1
to access the Settings page. Select [Bluetooth] and
2
< Settings Bluetooth
Bluetooth
DEVICE
Nebula-xxxxxx
Connected
EN
.
12