Before Installing - StetSom IR400.1 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

US
Introduction
Thank you so much for choosing a Stetsom product! The chosen
amplifier was developed with the most advanced technology for those
looking for high performance audio systems. Has dedicated controls
for H.P.F crossover filters. and L.P.F. which allows full control of the
frequencies reproduced by the amplifier.

Before installing

Please read this manual carefully.
• All product connections must be made with the same OFF.
• A fuse between the amplifier and the battery is required to protect
against overcharging. The fuse should be installed as close to the
battery as possible. Check the proper fuse for the amplifier according
to its consumption.
• Use gauges recommended in this manual to avoid cable overheating
and maximum power.
• Keep the cables as short as possible to increase sound fidelity and
avoid potential power losses.
• Route the installation cables as far away as possible from the original
vehicle wiring as it may cause interference and noise in your audio
system.
• Installation must be done by a qualified professional.
If in doubt, contact the store where the purchase or installation was made. For
more information please contact our Customer Service: BR +55 18 2104-9412.
8

Publicidad

Tabla de contenido
loading

Tabla de contenido