CARE & MAINTENANCE:
Wood
• Your furniture has been manufactured from FSC 100% Eucalyptus wood. This wood is
renowned for its high natural durability.
• The eucalyptus wood goes through a strict kiln dry process and is treated with oil to
protect it from the elements and increase its resistance to cracking due to drying out.
• To keep your furniture at its best, we recommend the following care:
-
Use a damp sponge to clean the whole product and dry it with a clean cloth.
-
After exposure to the sun and rain, the product may look older, you can maintain
your product using the below methods:
-
If not in use for a long period of time, it is recommended to store in a dry, cool place
with a furniture cover (not included).
-
For the product that is always kept outdoors, below maintenance method
is recommended:
1. Every 3 months, use sand paper with 180 grit to slightly sand the surface, and
clean it with a dry cloth.
2. Apply protection oil on the wood surface and let it dry naturally. Protection oil can
be found at your local hardware stores. The main compositions of protection oil
are linseed oil and alkyd synthetic resin.
3. Let the furniture dry for at least 48 hours before using it.
Caution:
• Before applying any protection oil, test on a small surface of the product first.
• Do not apply any abrasive chemicals that may spoil the product. Do not use a pressure
washer or you will damage the texture of the wood.
• During winter, store the product in your garage or in a cool and well-ventilated room.
• Wood is a natural product. This means it is subject to variations in color and grain.
Fine cracks may appear after long periods of hot, dry weather. These do not impair
the product's quality and function.
• The product should be put on a flat surface.
• Periodically re-fasten all screws.