English (Original Instructions); Definitions: Safety Guidelines - DeWalt D25902 Traducido De Las Instrucciones Originales

EngLIsh
DEMOLITION HAMMER
D25902, D25951
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
UK & Ireland
Type
Frequency
Power output
Impact rate
Single impact energy (EPTA 05/2009)
Tool holder
Chisel positions
Weight
Noise values and/or vibration values (triax vector sum) according to
EN60745‑2‑6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Chiselling
Vibration emission value a =
h,Cheq
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
18
WALT one of the
e
D25902 D25951
V 230 230
AC
V 230/115 230/115
AC
1 1
Hz 50 50
W 1550 1600
min -1 1050–2100 1620
J 19 24
SDS MAX SDS MAX
12 12
kg 10.5 13.3
dB(A) 89 90
dB(A) 100 101
dB(A) 3 2
m/s 2 7.5 8.8
m/s 2 1.5 1.5
EC-Declaration of Conformity
Machinery Directive
Demolition Hammer
D25902, D25951
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
2000/14/EC, Electrical concrete breaker (hand-held), m ≤ 15 kg,
Annex VIII, TÜV Rheinland LGA Products GmbH (0197), D-90431
Nürnberg, Germany, Notified Body ID No.: 0197
Level of sound power according to 2000/14/EC (Article 12,
Annex III, No. 10; m ≤ 15 kg):
L (measured sound power level)
WA
D25902
D25951
L (guaranteed sound power level)
WA
D25902
D25951
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering PTE Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
25.10.2018
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
dB(A) 100
dB(A) 101
dB(A) 105
dB(A) 105
WALT at
e
WALT.
e