Product Familiarisation; Additional Safety Instructions For Pneumatic Power Tools - Silverline 427558 Manual Del Usuario

Pistola de engrase neumática 400 cm3

Ocultar thumbs Ver también para 427558:

Traducción del manual original (64 páginas)

Contenido

Tabla de contenido

Idiomas disponibles

427558

Workplace hazards

• Slips, trips and falls are major causes of workplace injury. Be aware of slippery

surfaces caused by use of the tool and also of trip hazards caused by the air

line or hydraulic hose

• This tool is not intended for use in potentially explosive atmospheres and is not

insulated against contact with electric power

Dust and fume hazards

• Dust and fumes generated when using this tool can cause ill health (for

example cancer, birth defects, asthma and/or dermatitis); risk assessment and

implementation of appropriate controls for these hazards are essential

• Risk assessment should include dust created by the use of the tool and the

potential for disturbing existing dust

• Operate and maintain this tool as recommended in these instructions, to

minimise dust or fume emissions

• Direct the exhaust so as to minimise disturbance of dust in a dust-filled

environment

• Where dust or fumes are created, the priority should be to control them at the

point of emission

• Use respiratory protection in accordance with employer's instructions and as

required by occupational health and safety regulations

Additional Safety Instructions for

Pneumatic Power Tools

Air under pressure can cause severe injury:

• Always shut off air supply, drain hose of air pressure and disconnect tool from

air supply when not in use, before changing accessories or when making

repairs

• Never direct air at yourself or anyone else

• Whipping hoses can cause severe injury. Always check for damaged or loose

hoses and fittings

• Whenever universal twist couplings (claw couplings) are used, lock pins should

be installed and whipcheck safety cables should be used to safeguard against

possible hose-to-tool or hose-to-hose connection failure

• Do not exceed the maximum air pressure

• Never carry an air tool by the hose

Air Grease Gun 400cc