Listening To A Cd (Cds) - Sharp CD-BK250W Manual De Manejo

Listening to a CD (CDs)

This system can play audio CD-R and CD-RW discs just as CD discs, but cannot per-
form recording. (However, some CD-R and CD-RW discs may not be played.)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the OPEN/CLOSE button to open the disc tray.
4
Place the CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to turn the
disc tray, then place the CD in the open position.
z CDs can be placed on any open position on the disc tray.
z Be sure to place 8 cm (3") CD(s) in the middle of the disc positions.
5
Press the OPEN/CLOSE button to close the disc tray.
Total number of tracks on
the CD whose number is
flashing
6
To select the CD you want to listen to first, press one of
buttons on the remote control.
Sound Control (See page 12.)
01/3/8 CD-BK250W(X)E2.fm
12 cm (5") 8 cm (3")
Total playing time of the CD whose
number is flashing
1 - 3
Continued to the next page
ENGLISH E-14