Orbegozo PB 2231 Manual De Instrucciones página 7

PB 2231
9. This appliance must be installed following
the national
installations.
10. This appliance is for household use only.
User Manual:
Insert the battery correctly. 2 x 1.5V AAA (included)
Step 1. Press the platform centre and remove your foot.
Step 2. "0.0" will be displayed
Step 3. The scale will switch off and now it is ready for use.
This initialisation process must be repeated if the scale is moved. At all other times step
straight on the scale.
Step 4. Gently step on the scale. Put your feet evenly on the scale without
and wait whilst the scale compute weight. Your correct weight will then be displayed in
the following way .
When you step off the scale, it will automatically switch off. ( If no weighting is carried
out while the zero is being displayed, the scale will automatically switch off after
approximately 10 seconds).
Note:
If you step on the scale before it showing "0.0", the scale would not showing the correct
weight of your body. Scale does not work under 5KG. After showing result 10 seconds,
the scale turns off automatically.
Using Notice:
1. LCD showing "Err" for Overload.
2. LCD showing "Lo" for Low power.
regulations for electrical
moving
7