Initial Setup; Drain Connection - J.P. SELECTA MACROFRIGER-BLT GR-50T Manual De Instrucciones

MANUAL DE INSTRUCCIONES
J
.P. SELECTA s.a.u.
CÓDIGO 80343 REV A

5.3 Initial setup

Once the unit is installed, remove the lifting supports and put the hole
taps supplied into place.
Adjust the 4 levelling rubber feet supports so that the unit is raised and
do not rest on the wheels, and adjust until the machine is levelled.
Remove the caps to open manually.
Open the door by gently pulling the cables.
Remove the packaging protections from inside the chamber. Check that
there is no packing material remaining in the unit.

5.4 Drain connection

To prevent water from accumulating condensation inside the tank,
there is a back drain.
Connect the supplied nipple by screwing it onto the racord. Connect the
silicone tube to the drain of your installation.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.grupo-selecta.com
09/2021 Pag.: 23
Tel 34 937 700 877 Fax 34 937 702 362