Settings; Programming - J.P. SELECTA MACROFRIGER-BLT GR-50T Manual De Instrucciones

MANUAL DE INSTRUCCIONES
Return to
main menu
Program Mark as
selected
J
.P. SELECTA s.a.u.

7.1 Settings

Set on this screen the following settings:
LANGUAGE: Spanish, English & French.
DATE & TIME.
TEMPERATURE UNITS in ºF or ºC.
ROTOR: Enters the rotor used in the current operation, essential
for braking and acceleration ramps application.
ENTER / CHANGE PASSWORD: Password access for software
Access authoriza-
tion for Firmware updates or restart life counters.
update.
DOWNLOAD LOGS: Download Time/ temperature/ RPM/RCF
logs of any executed cycle.

7.2 Programming

In this menu the program parameters are set.
-
gramming to avoid dangerous situations.
Select the
program
-
A program is composed of «phases» of:
- Acceleration (slope)
Approximate acceleration values:
- Speed (rpm) and time (minutes, seconds) and:
- A final braking phase.
Select the program and press «EDIT».
Add Delete
phase phase
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.grupo-selecta.com
CÓDIGO 80343 REV A
Rotor: Enter the rotor identification. This limits the pro-
Temperature: It sets the working temperature.
SLOPE 0:
SLOPE 1:
SLOPE 2:
SLOPE 3:
SLOPE 4:
09/2021
04 rpm x seconds
06 rpm x seconds
12 rpm x seconds
17 rpm x seconds
24 rpm x seconds
Tel 34 937 700 877 Fax 34 937 702 362
Pag.: 27