Cleaning And Care - Sinbo SHD 7022 Instruccion Manual

SINBO SHD 7022 HAIR DRYER
INSTRUCTION MANUAL
This Hairdryer is very simple to use, but please read these instructions carefully before
using.
HOW TO USE YOUR HAIRDRYER
1. Always ensure the switch is set to OFF position before plugging the unit the power
outlet.
2. Use the high setting for drying hair, and use low setting for styling.
3. Should the hair dryer stop for any reason, turn it off at once and let it cool down.
4. Adjust the desired blowing strength:
Position 0: OFF
Position 1: Half power, medium temperature for gentle drying and styling
Position 2: Full power, high temperature for quick drying

CLEANING AND CARE

IMPORTANT: Always ensure that hair dryer is disconnected from the mains supply before
cleaning.
Use a damp cloth for cleaning and wipe dry. This will help preserve the original finish
of your hair dryer.
Abrasive cleaners should not be used.
WARNING: Never immerse the hair dryer in water and always ensure that plug is kept
dry.
Frequently clean out any hair or fluff that becomes stuck in the inlet filter. To clean the
filter, vacuum or dry brunch clean, never immerse the filter in water. Failure to keep
filter clean may result in overheating.
WARNING: Keep this appliance away from water. Do not use this appliance
near water and bathtubs, showers, basins or other vessels containing
water.
IMPORTANT SAFEGUARDS
When using electrical appliances, especially when children are present, basic safety
precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
DANGER-To reduce the risk of electrocution:
1. Always unplug this appliance immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where it can fall or be pulled into a tub of sink.
4. Do not place in or drop into water or other liquid.
5. Do not reach for an appliance that has fallen into water. Unplug immediately.
ENGLISH
- 6 -