Scope Of Supply; Assembly; Preparation; Required Tools - Teka T-BBQ 3100 G BK-SS Manual Del Usuario

Scope of supply

Part No. Part Description
A Warming Rack
B Cooking grid
C Flame Tamer
D Firebox Assembly
E Left Side Shelf
F Bracket F
G Bracket G
H Cart Front Brace
I Cart Leg, Rear Left
J Cart Side Brace
K Side Burner Grid
L Cart Leg, Front Left
M Cart Side Panel
N Caster
O Locking Caster
P Door Handle
Q Door Stopper
R Cart Bottom Panel
S Door Handle Bezel
T Wheel Cap
U Wheel
V Axle
W Cart Leg, Front Right
X Cart Leg, Rear Right
Y Door
Z Grease Tray
A1 Cart Rear Brace
B1 Bracket B1
C1 Bracket C1
D1 Side Burner Shelf
E1 Side Burner
AA 1/4"x12mm Screw
BB 5/32"x10mm Screw
CC 1/4" Spring Washer
DD 1/4" Flat Washer
EE Cotter Pin
Please check the delivery for completeness and transport
damage. If any part is missing or defective, please contact
your dealer.
Complaints regarding damage or missing parts lodged upon
commencement or completion of installation will not be
recognized.

Assembly

Preparation

Q'ty
1
Before beginning assembly of product, make sure all parts
are present. Compare parts with package contents list and
2
hardware contents list. If any part is missing or damaged, do
3
not attempt to assemble the product.
1
Contact the dealer from whom you purchased the appliance if
you find that parts are missing or show damage.
1
Do not use the appliance unless missing parts have been
1
delivered in addition or defective parts have been replaced.
1
Using an incomplete or damaged appliance leads to personal
1
injury and property damage.
1 Remove and safely discard any packaging material or
promotional labels attached to the set.
2
1. Assemble the appliance completely and make all required
1
adjustments prior to operation.
1
2. Follow the assembly and operation instructions closely. Use
2
the figures as a visual guide.
3. Pay attention to small parts such as screws and nuts
1
that are loosened or removed for assembly or during
1
adjustments. Keep them safe in order to avoid losing them.
1
4. The appliance is large. It is recommended to assemble by
1
two people.
1
Danger! Risk of injury!
2
Failure to follow these instructions can lead to
problems and risks while using the barbecue.
2
- Follow all assembly instructions listed here.
2
WARNING!
1
Use the appliance only after it has been completely
1
assembled and adjusted!
1
IMPORTANT: Parts sealed by the manufacturer or the
1
manufacturer's agent shall not be manipulated by the user.
1
1

Required tools

1
1x cross-head screwdriver
1
1x adjustable open-end wrench
1
1

Assembling the barbecue

20
1. First read through the assembly instructions completely.
30
2. Two people are required for assembly.
8
3. Take your time to assemble the barbecue on a level surface
6
of three to four square meters.
1
4. Make sure the required tools are within easy reach. Small
parts such as handles may already be pre-assembled.
EN-8