Advanced
Select Wireless > Advance, the wireless advance settings parameters are shown in the
following figure:
BG Protection Mode: Enables a backward compatible protection mechanism for
802.11b clients. There are three modes: (Default: Auto).
Beacon Interval: The rate at which beacon signals are transmitted from the access
point. The beacon signals allow wireless clients to maintain contact with the access
point. They may also carry power management information.
Data Beacon Rate (DTM): The rate at which stations in sleep mode must wake up to
receive broadcast/multicast transmissions.
Fragment Threshold: This value should remain at its default value of 2346. If you
experience a high packet error rate, you may slightly increase your fragment
threshold.
RTS Threshold: Request To Send (RTS) threshold should be remained as the value