Security - ZTE MF20E Manual De Usuario

of 2347.
 TX Power: Transmit power should be remained as the value of 100.
 Short Preamble: Enable short preamble or not.
 Short Slot: Enable short slot or not.
 Tx Burst: Enable or disable the TX Burst.
Pkt_Aggregate: Enable or disable the Pkt_Aggregate.

 IEEE 802.11H Support: Enable IEEE 802.11H Support or not.
WMM Capable: Enable or disable WMM Capable.
 APSD Capable: When WMM is enabled, Automatic Power Save Delivery (APSD) can
also be enabled. APSD is an efficient power management method that enables client
devices sending WMM packets to enter a low-power sleep state between receiving
and transmitting data.(Default: Disable)
 DLS Capable: Enable or disable DLS Capable.
 WMM Parameters ： You can configure WMM parameters by clicking WMM
parameters.
Click Apply to confirm your configuration.

Security

Select Wireless > Security, the wireless security settings parameters are shown in the following
figure:
 SSID Choice: Select the SSID.
 Security Mode: Choose the security mode.
Diasble