WPS Configured:
WPS SSID:
The service set identifier for the unit.
WPS Auth Mode:
WPS Encrypt Type:
WPS Default Key Index:
WPS Key (ASCII):
the wireless network.
AP PIN:
Displays the PIN Code for the adaptor. The default is exclusive for each unit.
Click on Reset OOB button to Reset WPS AP to the OOB (out of box) configuration.
WPS Mode:
Selects between methods of broadcasting the WPS beacon to network clients wanting to join
the network.
PIN: If this option is enabled, you need to enter a wireless client's PIN code in the field and
keep the same code in the client.
PBC: This has the same effect as pressing the physical WPS button that is located on the
front of the wireless AP/Router. After checking this option and
AP Client
Select Wireless > Ap Client to show the information of the AP client and set the maximum
connected users.
Firewall
Content Filter
Click Firewall > Content Filter to setup Content Filter to restrict the improper content
access
States if WPS for wireless clients has been configured for this device.
The method of authentication used.
The encryption type used for the unit.
Displays the WEP default key (1~4).
Displays the WPS security key (ASCII) which can be used to ensure the security of