Control Buttons - Side Panel; Control Buttons - Back Panel; Features : Remote Thermo-Hygro Sensor - Oregon Scientific BAR898HGA Manual Del Usuario

B3. [ MEMORY ] BUTTON
- Displays minimum and maximum temperature
an d h u m id it y r e a d ing s , an d er a s es m em o r y
data
B4. [ CHANNEL ] BUTTON
- Displays the temperature and humidity read
ings of the indoor or remote sensor
B5.[ SNOOZE / LIGHT ] BUTTON
- Activates the snooze function or turns on the
backlight
B6. DETACHABLE TABLE - STAND
( [ SNOOZE / LIGHT ] STAND - BUTTON)
- Acts as the [ SNOOZE / LIGHT ] button when
attached to the display unit
C. CONTROL BUTTONS - SIDE PANEL
C1 & C2. UP [ ] & DOWN [
- Increases or decreases the value of a setting
D.CONTROL BUTTONS - BACK PANEL
D1. BATTERY COMPARTMENT
- Accommodates four (4) pieces of UM-3 or
batteries
D2. [ HISTORY ] BUTTON
- Displays the barometric reading for the last 24
hours, or enters the altitude compensation setting
D3. [ mb / hPa - inHg ] SLIDE SWITCH
-Selects between "mb / hPa" or "inHg" pressure unit
display
D4. [ °C / °F ] SLIDE SWITCH
P/N: 086L002778-078 REV1
5/47
] BUTTONS
"AA" size
4
- Selects between Centigrade (°C ) or Fahrenheit
(°F) temperature unit display
D5. [ZONE] BUTTON
Press to select among the 4 U.S. time-zones:
Pacific(P), Mountain(M), Central (C) or Eastern (E)
D6 & D7. ALT ( ) or ALT (
Increases or decreases the value in compensational
altitude setting respectively
D8. [ RESET ] BUTTON
-Resets the unit by returning all setting to their default
values

FEATURES : REMOTE THERMO-HYGRO SENSOR

a. Two-line LCD
Displays the current temperature and humidity
monitored by the remote unit
b. LED indicator
Flashes when the remote unit transmits a reading
c. °C/°F slide switch
S e l e c t s b e t w e e n C e n t i g r a d e ( ° C ) a n d F a h r
enheit (°F)
) BUTTON