Sangean DCR-200 Instrucciones De Manejo página 37

Auxiliary input socket
A 3.5mm stereo Auxiliary Input socket is provided on the rear of your
digital receiver to permit an audio signal to be fed into the unit from an
external audio device such as iPod, MP3 or CD player.
1. Repeatedly press and release the Band button until "AUX IN"
is displayed.
2. Connect an external audio source (for example, iPod, MP3 or
CD player) to the Auxiliary Input socket.
3. Adjust the volume setting on your iPod, MP3 or CD player to ensure
an adequate signal level from the player, and then use the Volume
control on the digital receiver as needed for comfortable listening.
DC out jack
A 4.4mm 5V / 0.8A DC output jack is provided along with the digital
receiver for you to connect and charge any compatible external device.
This function can only work in DC mode, and is not workable when using
the batteries.
1
GB
36