Thermo Scientific ThermoFlex Manual De Instrucciones página 127

Section 4
UNITS
UNITS is used to view/change the controller's temperature, pressure and fluid flow (only chillers with
an optional flow transducer) scales.
If a change to the setting is needed, highlight the desired scale and then press the enter button. The
highlight will flash. Press the up or down arrow button to bring up the desired scale. Once the desired
scale is displayed press enter to accept the change and stop the flashing.
When the desired changes are made press the left arrow, or esc button, to return to the SETTINGS
display.
UNITS
Temperature
Pressure
Flow
Setpoint
Setpoint can be used to view/change the controller's setpoint temperature.
If a change to the setpoint is needed, highlight Setpoint and then press the enter button. The highlight
will flash. Press the up or down arrow to bring up the desired setpoint value. Once the desired value is
displayed press enter to accept the change and stop the flashing.
SETTINGS
UNITS
Setpoint
TEMPERATURE
PRESSURE
4-12 ThermoFlex
Scales: °C or °F
c
psi
gpm
Setpoint Range:
+5°C to +40°C for standard temperature chillers
+5°C to +90°C for high temperature chillers,
xx
+5°C to +88°C for P1 and P2 high temp chillers
Setpoint Default:
+20°C for all chillers
Defaults:
PSI, Bar or kPa
GPM or LPM
°C
PSI
GPM
Thermo Scientific