Thermo Scientific ThermoFlex Manual De Instrucciones página 80

Specifications
Standard Chiller Process
Fluid Temperature/Setpoint Range
High-Temperature Chiller Process
Fluid Temperature/Setpoint Range
Ambient Temperature Range
Temperature Stability
Cooling Capacity at 20°C 60 Hz
Reservoir Volume Gallons
Footprint or Dimensions (H x W x D)
Air-Cooled Inches
Water-Cooled Inches
Weight P 2/P 3/P 5 (empty)
Water-Cooled lb
Pumping Capacity
P 2/MD 2 - Positive Displacement 60
P 3 - Centrifugal Pump 60 Hz*
P 5 - Centrifugal Pump 60 Hz*
T 5 - Turbine Pump 60 Hz*
Thermo Scientific
All Chillers
50 Hz
Heater Size
Refrigerant
Liters
Centimeters
Centimeters
Air-Cooled lb
kg
kg
Hz* 4.0 gpm @ 60 psig (15.1 lpm @ 4.1 bar)
50 Hz* 3.3 gpm @ 60 psig (12.5 lpm @ 4.1 bar)
10 gpm @ 32 psid (37.9 lpm @ 2.2 bar)
50 Hz* 10 gpm @ 20 psid (37.9 lpm @ 1.4 bar)
20 gpm @ 60 psid (75.7 lpm @ 4.1 bar)
50 Hz* 20 gpm @ 35 psid (75.7 lpm @ 2.4 bar)
7.3 gpm @ 60 psid (27.6 lpm @ 4.1 bar)
50 Hz* 6.2 gpm @ 60 psid (23.5 lpm @ 4.1 bar)
* Pumping capacity pressure values for centrifugal and turbine pumps are differential pressures between the
inlet and the outlet of the chiller. P 5 pumping capacity in high temperature chillers is slightly lower, see P 5
Pumping Capacity curves in this Section.
• Cooling capacity based on P 2 pumps with no backpressure. Heat input from the pump will result in a
reduction in cooling capacity. The cooling capacity reduction will vary based on the pump chosen as well as
pump backpressure and flow.
• Specifications obtained at sea level using water as the recirculating fluid, at a 20°C process setpoint, 25°C
ambient condition, at nominal operating voltage. Other fluids, fluid temperatures, ambient temperatures,
altitude or operating voltages will affect performance. See Section 3.
• Additional dimensions are at the end of this section.
• For global voltage chillers with a P 2 pump add 30 pounds (14 kilograms). Add 10 pounds
(4.5 kilograms) for chillers with a P 3 or P 5 pump.
• Thermo Fisher Scientific reserves the right to change specifications without notice.
ThermoFlex7500
+5°C to +40°C
+41°F to +104°F
+5°C to +90°C
+41°F to +194°F
+10°C to +40°C
+50°F to +104°F
± 0.1°C
7500 W (25575 BTU)
6425 W (21910 BTU)
5.0kW at 208V/6.1kW at 230V
4.6kW at 400V/6.1kW at 460V
R407C
4.75
17.9
52.3 x 25.2 x 33.8
132.7 x 63.9 x 85.6
45.9 x 25.2 x 33.8
116.6 x 63.9 x 85.6
356/372.5/405.5
161.5/169/184
315/331.5/364.5
143/150/165
ThermoFlex10000
+5°C to +40°C
+41°F to +104°F
+5°C to +90°C
+41°F to +194°F
+10°C to +40°C
+50°F to +104°F
± 0.1°C
10000 W (34100 BTU)
8500 W (28985 BTU)
5.0kW at 208V/6.1kW at 230V
4.6kW at 400V/6.1kW at 460V
R407C
4.75
17.9
52.7 x 25.2 x 33.8
134.0 x 63.9 x 85.5
46.4 x 25.2 x 33.8
117.8 x 63.9 x 85.6
356/372.5/405.5
161.5/169/184
315/331.5/364.5
143/150/165
4.0 gpm @ 60 psig (15.1 lpm @ 4.1 bar)
3.3 gpm @ 60 psig (12.5 lpm @ 4.1 bar)
10 gpm @ 32 psid (37.9 lpm @ 2.2 bar)
10 gpm @ 20 psid (37.9 lpm @ 1.4 bar)
20 gpm @ 60 psid (75.7 lpm @ 4.1 bar)
20 gpm @ 35 psid (75.7 lpm @ 2.4 bar)
7.3 gpm @ 60 psid (27.6 lpm @ 4.1 bar)
6.2 gpm @ 60 psid (23.5 lpm @ 4.1 bar)
ThermoFlex
Section 2
2-3