Finding A Circuit Breaker Or A Fuse - Multimetrix CBF01 Manual De Instrucciones

The emitter-receiver unit is operational, you can now go on to the next
step.
Fig.2

3.3 Finding a circuit breaker or a fuse

1. Go to the distribution panel with the circuit-breakers and hold the
receiver vertically by placing the flat surface of its tapered end
directly on the circuit-breaker or the fuse (fig. 4).
Slowly move the receiver from the top to the bottom, and from left
to right on the row of circuit breakers or fuses. The receiver will
emit a sound signal and its green LED will flash when it detects
the signal from the emitter.
If required, reduce the sensitivity of the receiver to locate the
circuit breaker (or the fuse) that protects the circuits.
16
English
Fig.3
CBF01