MAINTENANCE
■
When not using or when cleaning the
product, disconnect it from the power
supply and remove the battery pack.
■
Avoid using solvents when cleaning
plastic
parts.
susceptible
to
commercial solvents. Use clean cloth
or soft brush to remove dirt and dust.
■
Do not, at any time, let brake fluids,
gasoline, petroleum-based products,
and penetrating oils come in contact
with plastic parts. These products
contain chemicals that can damage,
weaken, or destroy plastic.
WARNING
Hazardous voltages are present within
the product; do not disassemble.
■
The supply cord cannot be replaced.
If the cord is damaged, the product
should be scrapped.
CLEANING THE CHARGER
WARNING
Unplug the charger power cord from
power supply before cleaning at any
time to prevent serious personal injury.
■
Clean the charger surface (except
labels) using a damp cloth with a mild
detergent.
■
Do not use any strong detergents
on the plastic housing. They can be
damaged by certain aromatic oil such
as pine and lemon, and by solvents
such as kerosene.
■
Moisture can cause a shock hazard.
Wipe off any moisture with a soft dry
cloth.
4
| English
Most
plastics
are
various
types
of
STORAGE
Store your charger in a cool dry place
between 10°C. and 38°C.
KNOW YOUR PRODUCT
See Fig. 1
1. RY36C17A Charger
2. Battery port
3. Power cord
SYMBOLS ON THE PRODUCT
Some of the following symbols may
be used on this product. Please study
them and learn their meaning. Proper
interpretation of these symbols will allow
you to operate the product better and
safer.
Precautions that involve
your safety.
To reduce the risk of
injury, user must read and
understand user's manual
before using this product.
Class II: Protection
against electric shock rely
on double insulation or
reinforced insulation.
Time-lag type fuse
Indoor use only
Waste electrical products
should not be disposed
of with household waste.
Please recycle where
facilities exist. Check with
your Local Authority or
retailer for recycling advice.
CE conformity
EurAsian Conformity Mark