Publicidad
Idiomas disponibles
Idiomas disponibles
23. Never use accessories which are not recommended by the manufacturer. They could constitute a
danger to the user and risk to damage the appliance.
24. Always set any control to "off" before unplugging from the socket.
25. Make sure the ambient temperature is above 0°C, otherwise the appliance does not function properly.
26. Always descale the appliance regularly to ensure optimum performance and prevent malfunction.
27. Make sure cool down before cleaning or storing the appliance.
28. The appliance may give off some smoke and smell when you use it for the first a few times because
of the oil on some parts, it will disappear after a few times uses.
Features
- Capacity: 1.2L
- Anti-drip function
- Water tank with translucent water level marks
- Metal plate with keep warm function
- Swing-out filter basket
- On/off button with light indicator
- Permanent filter with handle
- AC220-240V, 50Hz, 800W
Know your Coffee Maker
1. Water tank cover
2. Water tank with water level indication
3. Top lid
4. Filter holder
5. Anti-drip valve
6. Glass jug
7. Warm plate
8. On/Off switch with indicator lamp
Operation
1. Uncover the water tank cover and fill with fresh cold water to required level.
2. Close the water tank cover.
3. Swing out the filter holder, put adequate quantity of coffee powders into the permanent filter (if
applicable) or paper filter inside the filter holder.
4. Return the filter holder to original position, make sure it is fixed properly.
5. Place the jug on the warm plate.
6. Switch on the appliance by pressing the On/Off switch, the indicator lamp will light up and now the
appliance starts to work.
7. The appliance will brew until the water tank is emptied, then automatically enter into keep-warm
mode. The warm plate will keep the brewed coffee warm at:
1) Above 72˚C in half an hour.
2) Above 68˚C in an hour.
Cleaning
1. Do not forget to remove the plug from the socket and make sure cool down before cleaning the
appliance.
2. Never immerse the cord, plug, or appliance itself in water.
3. Wipe outside with soft, moist cloth when appliance is cold down completely, never use metal polish.
4. Clean the permanent filter (if applicable) and other detachable parts in warm soapy water, rinse with
fresh water and dry them before reassembling.
5. Clean the inside of jug with a soft brush in warm soapy water. rinse with fresh water and dry it before
next use.
- 8 -
Publicidad
