Proxy Menu - Panasonic AJ-YAX800G Manual Del Operador

PROXY menu

Setting the menu
1Insert a P2 PROXY card into the P2
cam, and turn on the power.
2Press the THUMBNAIL button to
display the thumbnail screen.
3Press the MENU BAR button to move
the pointer to the menu bar.
4Select OPERATION
SETUP 5 PROXY using the cursor
buttons and the SET button.
5Select menu
values using the cursor buttons and
the SET button.
7 (E)
5
DEVICE
items and specify
PROXY Menu
Items
REC MEDIA OFF
P2
P2&SD
Select media for proxy data recording.
OFF:
No proxy data are recorded.
P2:
Proxy data are recorded on the P2 card.
P2&SD:
Proxy data are recorded on both the P2 card
and the SD memory card.
O Voice memo is recorded on both the P2
card and the SD memory card, if you record
a voice memo during proxy data recording.
O If you record a voice memo after proxy data
recording finishes, voice memo is recorded
on the P2 card only.
TC SUPER OFF
UPPER
LOWER
Specify an option for superimposing the time
code display on the video recorded as proxy data.
OFF:
Time code display is not superimposed on the
recorded video.
UPPER:
Time code display is superimposed on the
upper area of the recorded video.
LOWER:
Time code display is superimposed on the
lower area of the recorded video.
REC RATE 192kbps
768kbps
1500 kbps
Specify the recording rate for proxy data
recording.
INITIALIZE
Initializes the PROXY menu and the setting data
in the P2 cam.
O Be sure to perform this initialization the first
time you insert a P2 PROXY card in a P2 cam
that supports proxy recording.
The in the Adjustable Range column
indicates the initial value.
Adjustable Range
———