4
Get started
Get started
Insert the SIM card and battery
This phone is intended for use with the BL-5CB battery.
Safe removal. Always switch the device off and disconnect the charger before removing
the battery.
1
Place your finger in the recess at the bottom of the device, and carefully lift and
open the back cover (1).
2
Lift the battery, and remove it (2).
3
Insert the SIM card (3). Ensure the contact surface area is facing down and the
beveled corner of the SIM card is facing the bottom of the device.
4
Replace the battery (4) and back cover (5, 6, 7).
Remove the SIM card
Press the release spring (1), and slide out the SIM card (2).
Charge the battery
Your battery has been partially charged at the factory. If the device indicates a low
charge, do the following:
1
Connect the charger to a wall outlet.
2
Connect the charger to the device.