ausdom M04S Manual De Instrucciones página 7

Standby （ before pairing） The LED indicator flashes blue every
Standby (after pairing)
During a call
Incoming calls
Battery level low
Pairing
8. Using the mobile phone or the M04S Wireless
headset
* When there is an incoming call, a ring sound in the headset
is heard.
* Tag the "Power on/off" button to answer the incoming call. If
you press the answer button on the mobile phone to answer
the incoming call, music will stop accordingly.
* Tag the "Power on/off" button again to hang up the call or you
can press the hang up button on the mobile phone.
* One the call is terminated, music will automatically continuously
play again.
9. Used as a wired headset
Plugging the 3.5mm audio cable to the left side of the ear cup,
the M04S headset can be used as a wired headset under
certain circumstances, such as during air travel, the headset
battery with no power, or the audio device without the Wireless
function and without pairing.
10. Warranty
The M04S is covered by a 1-year manufacturer warranty. For
more information, visit www.ausdom.com/warranty.
Note: The microphone can't work when using the headset as
a wired headset.
second.
The LED indicator turns blue.
The LED indicator turns blue.
The LED indicator flashes red twice
every 2 seconds.
The LED indicator flashes red.
The LED indicator flashes red and blue
alternately.
EN-6