Cleaning The Appliance - Moulinex SOUP & CO LM907110 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
temperature with the aid of the + (increase) and -
(decrease) buttons.
• You then have to validate the temperature chosen by
pressing the
• OK button.
• The red indicator light illuminates and a 'beep' will
sound to inform you that the cooking has started.
• At any point you can adjust the motor onto either:
- slow speed (position 1) to mix liquid ingredients (e.g.
to make sauces).
- quick speed (position 2 onwards) to mix solid
ingredients.
BLENDER MODE (without cooking)
0
• Select a speed by turning the speed
selector to the right. The mixing starts
max
ice
and the time appears on the screen.
In blender mode, you can select up to 5 speeds with
different mixing types.

CLEANING THE APPLIANCE

• Do not immerse the appliance in water. Never put
the motor unit (A) under hot running water.
• Clean the jug immediately after use.
• Fill up the jug with 1 litre of hot water along with
2 or 3 drops of washing up liquid Only use the
recommended amount of water and washing up
liquid. An excess of washing up liquid creates more
foam and consequently can lead to overflowing.
• Use the automatic Autoclean programme: P3 or P4
(depending on model*) to carry out a prewash of
the bowl.
• Once the program has stopped, unplug the
appliance.
• Press on the trigger (d2) then remove the blender
jug (D).
• Place the jug on a flat surface.
• Unlock the lid by turning it a quarter turn clockwise.
Remove the lid with care.
• When the lid is cool, remove the carrier seal. To do
so, grip it between your thumb and index finger, then
pull to extract it. The seal dismounts without risk of
deterioration (Cf. Fig. 12).
• Finish cleaning the jug with the aid of a sponge.
The pulse speed can be found to the left of
position 0.
• Turn the speed selector to position 0 to stop the
appliance.
• Press on the trigger (d2) then remove the blender
jug (D). If you wish to program an operation time
which stops automatically:
• Adjust the operation time with the aid of the +
(increase) and - (decrease) buttons.
• Select a speed by turning the speed selector. The
count time appears on the screen.
• The motor stops automatically at the end of the
count time.
Ice crushing button: The "Ice" button starts the ice
crushing operation; this takes 30 seconds. You can
stop the appliance as required by pressing the "OFF"
button. You can crush a maximum of 6 to 8 ice cubes.
• Rinse the inside of the jug and the lid under running
water.
• In the event of the heated part of the jug getting
extremely dirty, leave to soak for a few hours in a mix
of water and washing up liquid to help get it clean.
• Take care when cleaning the blades
(d3) in the blender jug and when you
empty the bowl as they are sharp.
9
• Use a damp cloth to clean the motor unit (A). Dry
it carefully.
• The detachable parts (lid, seal, measuring cap,
cooking basket) can be cleaned with a sponge and
hot soapy water.
• To preserve the appearance and service life of the
lid of your appliance, hand wash it. Do not use the
abrasive side of the sponge to avoid scratches.
• The removable blade is not dishwasher safe — wash
it under running water using a brush.
15
15

Publicidad

Tabla de contenido
loading

Tabla de contenido