Power Setup - Targus DOCK570EUZ Guia Del Usuario

Targus Four Head 4k Dock with 100W Power Delivery
Contents
GB
• Four Head 4k Dock with 100W Power Delivery
• USB-C Cable
• AC Power adapter
• USB-C to USB-A adapter with Tether
• DC Output Cable
• Power Tips - 3A, 3H, 3H2, 3I2, 3P, 3W, 3X9
• VESA mount bracket (for selected models)
Workstation Setup
1. Connect all peripheral devices to the docking station.
2. Connect the Targus Universal Docking Station to your host device.
3. If your host device does not connect via USB-C, use the included USB-C to
USB-A adapter as shown below.
For USB-A
connection
to laptop
Front of the
Adapter
For USB-C
connection
Back of the Adapter
to laptop
+
Attach to
DOCK570
3
Targus Four Head 4k Dock with 100W Power Delivery

Power Setup

1.Locate the correct power tip 2. Connect to the
(test fit in laptop if needed)
Specifications
• 4 x DisplayPort (DP++; DP1.2) / HDMI Port (HDMI 2.0)
• 4 x USB 3.1 Gen1 (5Gbps) downstream ports (one port marked with
supports BC 1.2 and iOS device charging at 2.4A max.)
• 1 x USB-C upstream port with supporting Power Delivery 2.0 Profile 5 (up to
100W max. charging)
• 1 x USB-C downstream port (USB 3.1 Gen2, 10Gbps, data transfer only)
• Gigabit Ethernet
• Audio In/Out Port (3.5mm headset connector)
• Security Lock Slot
• 1 x USB-C Cable
• LED Power Indicator
• Power ON/OFF Button
• DC Power In: 20V, 180W
• DC Power Out: 19.5V 90W max.
Docking Station Diagram
DP++
HDMI Gigabit Ethernet
USB 3.1 (5Gbps) Port (supports charging)
4
3. Connect to your
power cord laptop
USB 3.1 (5Gbps) Power On / Off
DC Power In Lock Slot
USB to Laptop Port DC Power Out
Audio Headset USB-C
Connector
(10Gps, Data only)