Battery Removal - Remington SF4880 Manual Del Usuario

ENGLISH
, REPLACING THE INTERCEPT TRIMMERS & CUTTERS
• To ensure continued high quality performance from your shaver, we
recommend the intercept trimmers and cutters are replaced every 12
months.
, SIGNS THAT YOUR INTERCEPT TRIMMERS AND CUTTERS NEED
REPLACING
• Irritation: as intercept trimmers get worn, you may experience skin
irritation.
• Pulling: as the cutters wear, your shave may not feel as close and you may
feel the cutter pulling your hair.
• Wear through: you may notice that the cutters have worn through the
intercept trimmers
, REPLACING THE INTERCEPT TRIMMERS & CUTTERS
• Remove the shave head assembly by grasping the front and back of the
shave head and lifting the assembly upwards from the hair pocket.
• Insert the new shave head assembly on the hair pocket, press down and click
into place.
• Intercept trimmers and cutters replacement model: SPF-SF4880

BATTERY REMOVAL

• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the mains supply when removing
the battery.
• Using a small screwdriver, pry off the 2 side panels.
• Using a screwdriver remove the 4 screws from the front of the shaver and
remove the front housing.
• Using a screwdriver, remove 8 screws from the front of the shaver.
• Remove and open the core from the shaver to expose the batteries.
• Cut the wires connecting the batteries to the circuit board and remove the
batteries.
• The battery is to be disposed of safely.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with
this symbol must not be disposed of with unsorted municipal waste,
but recovered, reused or recycled.
6