TrekStor DataStation M Serie Manual Del Usuario página 8

5) Direct Push-for-Backup™ function (optional)
EN
With the direct Push-for-Backup™ function, pushing a button backs up previously selected files and folders from your computer
on the DataStation.
• Before you can use the backup function, the necessary backup software has to be installed on your computer. Insert the
accompanying CD, and select "N
Note: Do not change the set serial number.
• Restart your computer after the backup software is installed.
• Make sure that the DataStation is connected to the computer and turned on.
• Start the backup assistant "N
start it directly by pushing the Push-for-Backup™ button
• Use the assistant to configure your backup jobs. You can find instructions in the manual on the CD entitled "N
and in the help function of the backup program.
Note: Be aware that the assistant only offers support for the Push-for-Backup™ button when the DataStation is connected and
turned on.
• The backup jobs you create with the assistant are automatically executed at the planned time. When you press the
Push-for-Backup™ button
executed sequentially.
B I U 2 e
ero ack t P sseNtIals
B I U 2 e " by going to "s
ero ack t P sseNtIals
on the DataStation, you immediate start the data backup. All configured backup jobs are
}
" from the menu that appears. Follow now the installation instructions.
" "P
+
tart rograms
.
}
– 8 –
". However, the first time it is used, you can
ero
B I U 2"
ack t P