Sun Visor - Shark SPARTAN RS Manual Del Usuario

INSTALLATION OF THE SCREEN
1- Introduce the visor into its slot in a
slightly inclined position. Fully insert the
visor into its slot and keep pushing until
it «clicks».
2- Realign the circle on the visor with that
on the shell, just like during removal. Now
press and pivot the locking pin backward
in order to lock the visor. Repeat this step
on the other side. Close the visor.
To adjust visor friction, tighten (Fig. A.)
or loosen (Fig. B.) the adjustment screw
using the Allen key provided here. Cau-
tion: adjust in several steps without for-
cing, to maintain equal pressure on both
sides.
WARNING! If you are not sure that
you properly replaced the visor,
do not use the helmet. The visor could
suddenly and without warning become
detached from the helmet while riding,
causing you to lose control of your
motorcycle, resulting in an accident,
personal injury, or death.Contact your
retailer for any assistance or advice.
Do not ride with an open visor and do
not try to open or adjust the visor while
riding. The visor could suddenly and wi-
thout warning become detached from
1 1
the helmet, leaving your eyes and face
unprotected.
could be pulled to the side, causing you
to lose control of your motorcycle. These
events could cause you to lose control of
your motorcycle, resulting in an acci-
dent, personal injury or death.

SUN VISOR

1 - Your helmet has been equipped with
an internal sun visor. To use this accesso-
ry, redirect the arrow toward the front. To
cover the sun visor, reposition the arrow
toward the back.
2 2
WARNING! NEVER ride with the
sun shield as eye protection. You
must always ride with the visor in the
lowered position, as described in the
previous section.
A A
B B
In addition, your head
13