GYS POWERDUCTION 10R Manual Del Usuario página 9

Translation of the original instructions
• Check that jewellery (such as wedding rings) or other metal
pieces do not get close to the induction heating machine or
the inductor when switched on.
• Remove any jewellery or any metal object from yourself
before using this machine
• People with metal implants should not use this machine.
• In case of burns, rinse with water abundantly and see a
medical doctor as soon as possible.
Dangerosity of the gas fumes
• Keep the head away from the fumes, do not inhale.
• If working inside, ventilate the area or use a fume extractor
to evacuate the gases and fumes.
• Induction heating of certain materials such as adhesives and
flux can generate fumes and gases. Breathing these fumes
and gases can be dangerous for your health. For example,
heating urethane generates a gas : hydrogen cyanide, po-
tentially mortal for hu-mans.
• If the ventilation is insufficent, use an approved respiratory
unit.
• Read the safety data sheets (MSDS) and the manufacturer's
ins-tructions for adhesvies, flux, metals, consumables, coat-
ings, clea-ning agents, corrosives, and paint strippers.
• Do not use the heater on parts being degreased or sprayed.
The heat might react with fumes and generate highly toxic
gases.
• Work in a confined area only if it's well ventilated, or use an
ap-proved repiratory/filtration unit. Make sure that a quali-
fied per-son is around to watch over you. The fumes and
gases released while heating can replace oxygen or air,
causing accidents or death. Check the quality of the air
you're breathing
• Do not overheat metals, such as galvanised steel, covered
with lead or cadmium, unless the coating is removed from
the surface before it's heated, that the area is well ventilat-
ed, and if needed, use an approved filtration/respiratory
unit.. Foundry pieces and all metals containing such elements
may generates toxic fumes if overheated.
• Check the MSDS for temperature related details.
Warning, electrical danger
Caution: Danger of optical radiation when the heated metal
ele- ments reach fusion.
Warning ! Major magnetic field. People wearing active or
passive implants must be informed.
No further protectective steps are required when the machine
is used on its own. Further restrictions and/or protective
measures may be necessary in other cases.
POWERDUCTION 10R
EN
9