GYS POWERDUCTION 10R Manual Del Usuario página 10

Translation of the original instructions
After maintenance, the magnetic field levels must be checked
be-fore the machine is used again.
When switched on, never put the inductor near the head or
vital organs.
People wearing pacemakers are advised to not come close
to the machine. Risk of disruption of pacemaker operations
when close to the machine.
Consult a doctor before getting close to induction heaters.
Risk of metal or adhesive projections
• Wear approved protective goggles with lateral protections,
or protect the whole face with a screen.
• Wear protective clothes.
• Wear gloves.
Do not obstruct the machine's air intake, which facilitates air
circulation. Check the installation chapter before using the
device.
Connection:
• This machine must be connected to an earthed socket.
• These Class A devices are not intended to be used on a resi-
dential site where the electric current is supplied by the public
network, with a low voltage power supply. There may be
potential diffi-culties in ensuring electromagnetic compatibili-
ty on these sites, because of the interferences, as well as ra-
dio frequencies.
Maintenance:
• If the power cable is damaged, it must be replaced by the
manufacturer, its after sales service or an equally qualified
person to prevent danger.
•Service should be performed by a qualified person.
• Warning! Always disconnect from the mains before per-
forming maintenance on the device. High Voltage and Cur-
rents inside the machine.
• Remove the casing on a regular basis, to remove any excess
dust. Take this opportunity to have the electrical connections
checked by a qualified person, with an insulated tool.
• Do not use solvents or any agressive cleaning products.
• Clean the device's surfaces with a dry cloth.
Regulations:
• Device complies with europeans directives.
• The certificate of compliance is available on our website.
• EAC Conformity marking (Eurasian Economic Community).
• Equipment in compliance with British requirements. The British
Declaration of Conformity is available on our website (see home
page).
10
POWERDUCTION 10R
EN