Creating A Standard Definition Image Quality (Sd) Disc With A Recorder, Etc; (A/V Connecting Cable Connection) - Sony HDR-CX100 Guía De Operaciónes

Creating a standard
definition image
quality (SD) disc with a
recorder, etc.
(A/V connecting cable
connection)
You can dub images played back on your
camcorder on a disc or video cassette,
by connecting your camcorder to a disc
recorder or a Sony DVD writer, etc. with
the A/V connecting cable. Connect the
device in either way of  or . Refer
also to the instruction manuals supplied
with the devices to be connected. Select the
recording media that contains movies you
want to dub and the image quality before
starting the operation (p. 43, 48).
Connect your camcorder to the wall outlet (wall

socket) using the AC Adaptor for this operation
(p. 14).
High definition image quality (HD) movies

will be dubbed with standard definition image
quality (SD).
 A/V connecting cable (supplied)
Connect the A/V connecting cable to the
input jacks of another device.
 A/V connecting cable with S VIDEO (sold
separately)
When connecting to another device
via the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO cable
(sold separately), higher quality images can
be produced than with an A/V connecting
cable. Connect the white and red plug
(left/right audio) and the S VIDEO plug
(S VIDEO channel) of the A/V connecting
cable with an S VIDEO cable. If you
connect the S VIDEO plug only, you will
hear no sound. The yellow plug (video)
connection is not necessary.
US
0
Input
AUDIO
(Yellow)
Signal flow
1
Insert the recording media in the
recording device.
If your recording device has an input

selector, set it to the input mode.
2
Connect your camcorder to the
recording device (a disc recorder,
etc.) with the A/V connecting
cable  (supplied) or an A/V
connecting cable with S VIDEO
A/V Remote
Connector
S VIDEO
VIDEO
(Yellow)
(White)
(Red)