Fulgor Milano PROFESSIONAL F6PSPD30S1 Instrucciones Para La Instalación Y Uso página 6

EN
ARCING
Arcing can occur during both speedcooking and
microwave cooking. If you see arcing, press the
CANCEL/OFF pad and correct the problem.
Arcing is the microwave term for sparks in the
oven. Arcing is caused by:
- Metal or foil touching the side of the oven.
- Metal cookware or the wire oven rack used
during either speedcook or microwave cooking
- Metal, such as twist-ties, poultry pins, o
goldrimmed dishes, in the oven.
- Recycled paper towels containing small metal
pieces being used in the oven.
ATTENTION
• For detailed explanation for cleaning the gasket
seals of the doors of the cavity and adjacent
parts see MAINTENANCE paragraph.
• The oven must be cleaned periodically and all
food residues must be removed.
• Failure to keep the oven clean could cause
deterioration of the surfaces that could reduce
the life of the appliance and cause dangerous
conditions.
• Do not use rough abrasives or sharp metal
scrapers to clean the glass door of the oven
because they could scratch the surface and cause
the glass to shatter.
• Do not operate the oven without the turntable in
place. The turntable must be unrestricted so it can
turn.
• During and after use, do not touch, or let clothing
or other flammable materials contact any interior
area of the oven; allow sufficient time for cooling
first.
• Do not use steam cleaners to clean the appliance.
SAVE THESE INSTRUCTION
4