Get Aquainted - Plastimo VHF SX-400 Manual De Instrucciones

■ Appearance
r
PTT
q
t
w
y
u
i
o
e
CHARGE
q [PTT] Key
• Hold down [PTT] to transmit. Speak with normal tone.
• Release [PTT] to receive.
w Power Key
• Hold down this key for 1 second to power on/off the
radio.
e Charging Port
• Push down to open the charging port.
• The USB port is for charging only. Cannot support data
communications.
3
28

GET AQUAINTED

!0
LCD Display
!1
!2
Microphone
MIC
Loudspeaker
NOTE: Ensure the cover for the DC charging connector
is affixed tightly to avoid water ingress.
r Earphone Jack (SP/MIC)
• External earphone/microphone jack.
• Revolve the jack counter clockwise to open. Revolve
clockwise to close.
• This jack can be connected with computer for data com-
munication through programming cable.
NOTE: Ensure the cover for the earphone jack is affixed
tightly to avoid water ingress.
t [SCAN]/[DUAL]
• Press to start or stop scan mode (including normal and
priority scan).
• Hold on 1 second to enter the Dual or Tri-watch mode.
• Push to exit the watch mode.
• Hold this key and [HI/LO] key for 1 second to activate
the Vibration Draining Function.
y [C/16]
• Press to select Channel 16.
• Hold for 1 second to select Call Channel.
• The factory default for Call Channel is Channel 9.
• When the Call Channel is selected, hold for 3 seconds
to enter the Call Channel programming mode.
• While in the set mode, press this key to exit.
u [VOL/SQL]/[MONI]
• Press to enter the volume adjustment mode. Press again