Set Mode Items - Plastimo VHF SX-400 Manual De Instrucciones

■ Set Mode Items

D Prompt Tone
Turn on/off the prompt tone while operating.
D Weather Alert
The U.S.A NOAA broadcast station will transmit weather alert
when there are significant weather information. When the
weather alert function is activated, the radio will send alert.
" " flashes at the same time. The current used weather
channel will be scanned during the scan.
• With this function enable, "
channel is selected.
D Priority Scan
The radio has 2 scan types, Normal Scan (of) and Priority
Scan (on). Normal scan searches all TAG channels in the se-
lected channel group. Priority scan scans Channel 16 during
normal scan.
D Scan Resume Timer
The Scan Resume Timer can be turned off (of)/on (on).
• (of): The scan will pause until the signal disappears.
• (on): The scan will pause for 5 seconds and then resume.
D Automatic Scan
The Automatic Scan will be activated when no signal is re-
ceived and no operation is performed for 30 seconds.
D Dual/Tri Watch
Select dual (d-)/tri (t-) watch.
13
38
" appears when weather
D Monitor Key Function
Press Monitor Key, the squelch inhibit function will be turned
off to monitor the operating channel. There are two options for
opening key.
• Pu (PUSH): Press and hold [MONI], the sound emits from
loudspeaker. Keep holding [MONI], the loudspeaker con-
tinuing opened. Release [MONI], the loudspeaker closed.
• Ho (HOLD): Press and hold [MONI] for 1 second, the
sound emits from loudspeaker. The mode remains when re-
lease [MONI]. Press other key to turn off the loudspeaker.
D Automatic Backlight
The Automatic Backlight Function is convenient for night op-
eration. Press any key except [PTT] to turn on LCD and key-
pad backlight.
• The backlight is automatically turned off after 5 seconds
without operation.
D LCD Contrast
The LCD Contrast can be selected according to using envi-
ronment. It can be set as "Hi" or "Lo".
D Power Save
The Power Save Function can reduce the current drain and
extend the battery using time.
When the power save function is opened, the radio will enter
power save mode automatically if no signal is received or no
operation is performed within 5 seconds.