Set Mode; Set Mode Operation - Plastimo VHF SX-400 Manual De Instrucciones

■ Set Mode Operation

The Set Mode can be used to change the settings of the ra-
dio's function. The function settings including Prompt Tone,
Weather Alert, Priority Scan, Scan Resume Timer, Auto Scan,
Dual/Tri Watch, Monitor Key Function, Automatic Backlight,
LCD Contrast, Power Save, Float Alarm and Vibration Water
Draining.
No. Display
1 Prompt Tone
2 Weather Alert
3 Priority Scan
4 Scan Resume Timer
5 Automatic Scan
6 Dual/Tri Watch
7 Monitor Key Function
8 Automatic Backlight
9 LCD Contrast
10 Automatic Power Save
11 Float Alarm
12 Vibration Water Draining

SET MODE

Set Items
Set mode operation as below.
1. Power off.
2. Press and hold [VOL/SQL], power on to enter set mode.
3. Release [VOL/SQL], LCD appears "bEEP".
4. Press [VOL/SQL] to select desired setting items.
5. Press [Y] or [Z] to select desired setting parameter.
6. Press [C/16] to exit set mode.
Set Parameter Options
(OFF) / (ON)
(OFF) / (ON)
(OFF) / (ON)
(OFF) / (ON)
(OFF) / (ON)
- (Dual watch) / - (Tri watch)
Pu (Push) / Ho (Hold)
(OFF) / (ON)
Hi / Lo
(OFF) / (ON)
(OFF) / (ON)
(OFF) / 2 / 5 / 10 (seconds)
Default Value
(ON)
(OFF)
(OFF)
(OFF)
(OFF)
- (Dual watch)
Pu (Push)
(ON)
Hi
On
(OFF)
(OFF)
12
37