Plastimo VHF SX-400 Manual De Instrucciones página 31

to enter the squelch adjustment mode.
• Hold for 1 second to active the Monitor Function.
• Hold this key while power off. Press [
time to power on and enter the set mode.
• While in the set mode, press to select set items.
• While holding this key, press [Z] to turn on the Volume
Mute Function. Repeat again to turn off this function.
i [Hi/Lo]/[LOCK]
• Press to select high or low output power.
• Hold for 1 second to turn Lock Function on or off.
o [Y]/[Z]
• Press to select operation channel.
• While in the set mode, press to select the items.
• While in channel scan, press to change the scan direc-
tion.
!0 Antenna Connector
• Connect with 50Ω supplied antenna.
!1 [FAV]/[TAG]
• Press to sequentially select the favorite (TAG) channel
while ignoring untagged channel.
• Hold for 1 second to set or clear the TAG channel.
• Hold this key and power on to clear or set all TAG chan-
nels.
!2 [CH/WX]/[U/I/C]
• Press this key to select normal channel or weather chan-
nel.
• Hold for 1 second to select USA Channel, International
Channel or Canada Channel.
■ Display
] at the same
There are several kinds of symbols on the LCD display. Each
symbol represent one meaning. Knowing these meaning
helps the operation.
ICON
LOW
ATIS
USA
DESCRIPTION
Appear while transmitting.
Appear while selecting low power.
"LOW" flashes when forced to select low pow-
er because of battery low voltage or radio high
temperature etc.
Appear while working in ATIS Channel.
Select USA Channel.
4
29