Set Tag Channels; Set/Cancel Single Tag Channels; Set/Cancel All Tag Channels; Scan Operation - Plastimo VHF SX-400 Manual De Instrucciones

■ Scan Types
The Scan Types including normal scan and priority scan, can
be selected in the set mode (Please refer to set mode opera-
tion).
The weather channel will be scanned also if the weather alert
function is activated.
Set TAG channels before scanning. Cancel TAG for channels
not need to be scanned.
Normal scan: Scan TAG channels. Channel 16 won't be
scanned if it is not set as TAG channel.
Priority scan: Scan Channel 16 during normal scan.
Normal Scan

■ Set TAG Channels

Set TAG (★) for channels need to be scanned. Cancel TAG
(★) which is no need. The untagged channels will be skipped
during the scan period.
D Set/Cancel Single TAG Channels
1. Press [U/I/C] to select channel group.

SCAN OPERATION

2. Press [Y] or [Z] to select the desired TAG channel.
3. Hold [FAV/TAG] for 1 second to set the current channel
as TAG channel.
• "★" appears on LCD.
4. Hold [FAV/TAG] again for 1 second to cancel the TAG
channel.
• "★" disappears on LCD.
D Set/Cancel All TAG Channels
1. Power off. Hold [FAV/TAG] and press [
All TAG channels will be canceled in the selected channel
group.
2. Repeat the above operation to set all channels as TAG
channels.
■ Scan Operation
Set scan resume timer in the set mode.
1. Press [SCAN] to start normal scan or priority scan.
• "SCAN" flashes on LCD.
Priority Scan
• "16" appears on the sub channel readout during priority
• The scan pauses when a signal is received (The resume
• Channel 16 is monitored in priority scan.
• Press [Y] or [Z] to change the scan direction.
2. Press [SCAN] to stop scanning. Or press [PTT], [C/16],
[CH/WX] and [U/I/C] to stop.
scan.
time can be set in the set mode).
] to power on.
10
35