Symbols on the battery
Do not subject the battery to strong
sunlight over long periods and
do not leave it on a heater (max.
45°C).
Take batteries to an old battery
collection point where they will be
recycled in an environmentally
friendly manner.
Symbols on the recharger:
WARNING!
Before using for the first time, care-
fully read through the user manual
The recharger is for indoor use
only.
T2A
Miniature fuse
Protection class II
Machines do not belong with do-
mestic waste.
Symbols used in the instructions
Hazard symbols with informa-
tion on prevention of personal
injury and property damage.
Precaution symbol (explanation of
precaution instead of exclamation
mark) with information on preven-
tion of harm / damage.
Do not dispose of
batteries in house-
hold waste, fire or
water.
Notice symbol with information on
how to handle the device properly.
General notes on safety
Before you do any work with the
cordless pruner, make yourself
familiar with all operating parts.
Practise using the saw (sawing
logs on a sawhorse) and get an
experienced user or a specialist to
explain to you the function of the
saw, the way of working, the tech-
niques of sawing and the personal
protection equipment.
If an accident or fault occurs during
operation, immediately switch off the
device and disconnect at the plug.
Treat injuries appropriately or consult
a doctor. For the correction of faults,
read the "Troubleshooting" chapter
or contact our service centre.
General Safety Directions for
Power Tools
WARNING! Read all safety direc-
tions and instructions. Omis-
sions in the compliance with safety
directions and instructions can
cause electrical shock, fire and/or
severe injuries.
Retain all safety directions and instruc-
tions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
Work area safety:
•
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
GB
53