Cleaning; Maintenance Intervals; Sharpening The Cutting Teeth; Changing The Saw Chain - Grizzly AKS 1820 T Lion-Set Traducción Del Manual De Instrucciones Original

Cleaning

Do not use cleaning agents or sol-
vents. You may otherwise irrepara-
bly damage the appliance.
• Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
• Only dry wipe the saw chain. After
cleaning, lightly oil the saw chain with
chain oil. Apply individual drops of oil
to the joints and the points of the teeth
on the individual chain links.

Maintenance intervals

Carry out the maintenance work listed in
the table below at regular intervals. Regular
maintenance of your equipment extends
the lifespan of the equipment. You will also
achieve optimum cutting performances and
avoid accidents.
Table of maintenance inter-
vals
Machine Part
Komplette Maschine
Accessible screws
and nuts
Chain wheel
Saw chain
Blade
Action
Check condition, replace damaged
parts if necessary
Tighten
Check, replace if necessary
Check, oil, sharpen or replace if
necessary
Check, turn, clean, oil

Sharpening the cutting teeth

Leave the resharpening of a saw chain to a
specialist or proceed according to the instruc-
tions for your saw chain sharpener. Resharpe-
ning a saw chain takes practice. If in doubt, it
is preferable to replace the saw chain.

Changing the saw chain

Never fix a new saw chain on a
worn set of teeth or on a damaged
or worn blade.
1. Turn off the appliance and, before doing
any servicing, remove the battery.
2. Undo the blade fixing screw (
take off the chain wheel cover (
3. Take off the old saw chain (
The assembly and tensioning of the new
saw chain are described in the "Assembly"
chapter.
Before
each use





GB
5) and
6)
1).
After 10 ope-
rating hours

65