Figure 10: Knockout Locations; Figure 11: Securing The Cable To The Base - Allied Telesyn AT-iMG606BD Guia De Instalacion

Knockout
Locations
6. On the back of the cover, note the eight possible
locations where you can remove a "knockout" in order
to thread the cable into the base, as shown in
Figure 10.
Figure 10. Knockout Locations
7. Knock out one of the locations and secure the cable to
the base with a cable tie, as shown in Figure 11.
Figure 11. Securing the Cable to the Base
AT-iMG606BD Multiservice Gateway Installation Guide
Knockout
Locations
386
387
35