Figure 19: Installing The Connector Cover; Figure 20: Removing The Plug From The Fiber Optic Port - Allied Telesyn AT-iMG606BD Guia De Instalacion

15. If the fiber optic cable has a cap, remove it.
16. Align the connector shield with the slots and pin on the
cover and snap it down into place, as shown in
Figure 19.
Figure 19. Installing the Connector Cover
17. Remove the plug from the fiber optic port on the
AT-iMG606BD Multiservice Gateway, as shown in
Figure 20.
Figure 20. Removing the Plug from the Fiber Optic Port
AT-iMG606BD Multiservice Gateway Installation Guide
E R
P O W
395
E
S O L
C O N
396
39