Figure 14: Aligning The Screw Holes With The Posts; Figure 15: Attaching The Cover To The Base - Allied Telesyn AT-iMG606BD Guia De Instalacion

10. Mount the cover over the base, aligning the screw
holes with the posts, as shown in Figure 14.
Figure 14. Aligning the Screw Holes with the Posts
11. Using a Phillips screwdriver, attach the cover to the
base with three of the screws provided in the kit, as
shown in Figure 15.
394
Figure 15. Attaching the Cover to the Base
AT-iMG606BD Multiservice Gateway Installation Guide
394
390
391
37