Qstarz BT-Q1000eX Guia De Inicio Rapido página 13

English
Beyond Navigation
...................................................................................................................................................
.............................................................
I. Function of Vibration Sensor
Vibration Sensor: Vibration Sensor is functioned for power
saving and waypoint saving. It will detect the physical
movement of the device. When it detects the device not
moving more than 10 minutes, Q1000eX will enter sleep
mode so that the Blue LED will turn to flash every 5
seconds. Under sleep mode the log will be disabled.
When the device is on sleep mode, SHAKE the device to
wake it up and the blue LED will turn to flash every 2
seconds (at 5Hz mode this blue LED will not flash) and GPS
Orange LED will be also on.
*Vibration Sensor function is turned on as default and can
be turned off by provided software -> config GPS.
Note: Once the device enter sleep mode and it may auto
wake-up when detecting "significant" movement. We
strongly suggest you to use SHAKE method as first priority
to wake-up device in case some tracks might not be
recorded.
J. Mount BT-Q1000eX on your eXtreme Sports
Equipment
1. Clean Surface
Use isopropyl rubbing alcohol or white spirits, wipe lightly,
let dry. Do not use household cleaner.
Caution: Do not use with delicate or any rough
surface.
2. Remove male Velcro strip and adhesive liner
...................................................................................................................................................
.............................................................
www.Qstarz .com
13