Manually Configuring A Wireless Client - THOMSON TG185n Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 75
3
The THOMSON TG185n as Wireless Access Point
3.3

Manually Configuring a Wireless Client

Before you start
Before you can connect a computer to your wireless network you need to know which Network ID (SSID) and
encryption your THOMSON TG185n is using.
Default values
If you did not yet change the wireless settings, you must use the default settings that are printed on the label
on the bottom of your THOMSON TG185n.
Forgot your wireless settings?
If you have changed the wireless settings manually and you can't remember your settings, try one of the
following:
If one of your computers is already connected to your network:
1
Open your web browser and browse to http://192.168.1.13.
2
The
THOMSON TG185n Web Interface
3
The wireless Access Point page appears. Under:
Configuration, you can find the network name (SSID).
Security, you can find the encryption.
If none of your computers is connected to your network, connect a computer using a wired connection and
follow the procedure above to find out what your wireless settings are.
Another option is to reset your THOMSON TG185n and reconfigure it all over again. For more information,
see
"7.4 Reset to Factory Defaults" on page
Procedure
Configure your computer with the same wireless settings as your THOMSON TG185n. For more information,
consult the help of your wireless client.
E-DOC-CTC-20080624-0009 v0.2
appears. On the Basic Setting menu, click Wireless Setting.
52.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido