Configuring Wep Encryption - THOMSON TG185n Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 75
3
The THOMSON TG185n as Wireless Access Point
3.4.3

Configuring WEP Encryption

Warning
WEP has been proven to have some security issues. We strongly recommend you to use WPA-PSK instead.
Procedure
Continuing from
" Configuring the wireless
1
Clear the Enable WPS (Wi-Fi Protected Setup) check box.
2
In the Select Security Policy list, select WEP.
3
In the WEP Key Length list, click the desired key length (a higher key length offers higher security).
4
Select:
WEP64-ASCII if you want to use a key consisting of 5 alphanumeric characters.
WEP64-Hex if you want to use a key consisting of 10 hexadecimal characters (characters from 0 to 9
and from A to F).
WEP128-ASCII if you want to use a key consisting of 13 alphanumeric characters.
WEP128-Hex if you want to use a key consisting of 26 hexadecimal characters (characters from 0 to 9
and from A to F).
WEP152-ASCII if you want to use a key consisting of 16 alphanumeric characters.
WEP152-Hex if you want to use a key consisting of 32 hexadecimal characters (characters from 0 to 9
and from A to F).
5
In the text box next to this selection, type the network key of your choice.
6
Click Apply.
7
The THOMSON TG185n prompts you that the configuration was successful.
8
Configure your wireless client(s) with the same settings.
E-DOC-CTC-20080624-0009 v0.2
encryption":
19

Publicidad

Tabla de contenido
loading

Tabla de contenido