System Setting - AKASO V300 Manual Del Usuario

SYSTEM SETTING

1. RECORDING MODE SETTINGS
After turning on the camera, press
Press button to enter to the recording mode, press
option, press to enter into or confirm.
① Resolution - 1296P 30fps / 1080P , 30fps / 720P , 30fps for optional
Default setting is 1080P
② Loop Recording - off / 1 minute / 3 minutes / 5 minutes for optional
Default setting is 3 minutes
The files will be saved every 3 minutes if you choose 3 minutes. When the
memory card is full, the new files will cover the old one if the loop recording
is on, if it is off, then the camera won't work any more, please format the SD
card or change a new one.
③ WDR (Wide Dynamic Range) - On / Off for optional
Default is on
Balance light and darkness in driving to get the best image automatically.
④ Record Audio - On / Of for optional
Default is on
Allows the recorded videos with sound or no sound.
⑤ Date Stamp - On / Off for optional
Default is on
Show the date and time on videos.
⑥ G-sensor - off / low / medium / high for optional
Default is low
Gravity Sensor means any collision will activate the camera to record, and the
05
button to stop recording.
or to select setting
videos will be locked which will never be covered by new files.
The video is stored as a file every three minutes. When driving, if the road is
bumpy, please adjust it to low or turn off it directly to prevent the camera
doesn't work because of the memory card is full.
2. SYSTEM SETTINGS
Press twice times button to enter into the System Setting, press
select setting option, press to enter into or confirm.
① Date / Time Setting
Select "Date / Time" to press to set.
Press or to adjust Date / Time, press
finishing, press to exit.
② Parking Monitor - On / Off for optional
Default is off
Select "Parking Monitor", press
When there is no power input and the camera is turned off, the camera will be
turned on automatically and start recording after the car is hit, the video will
be saved, the camera automatically shutdown after 30 seconds. This function
is powered by the battery, please make sure the battery is at least 30% or
above for normal working.
③ Beep Sound - On / Off for optional
Default is on
Turn on or off the button sound.
④ Language
Default is English
English / Japanese / German / French / Italian / Spanish / Arabic for optional
to Switch / Confirm, after
to set "On / Off".
or to
06