Use And Operation; Function Buttons - Honeywell HF Serie Manual De Instrucciones

USE AND OPERATION

CONTROL PANEL
1) Indicator Lights
2) Power Control
3) Filter Reset
4) Fan Speed Control

FUNCTION BUTTONS

POWER CONTROL
The Power Control
electrical outlet, the POWER indicator light will illuminate red indicating the unit is in a Standby
Mode, ready to be switched on at anytime. The air vent will automatically open when the unit is
turned ON and automatically close when unit is turned OFF.
FILTER RESET
When the operation has reached 250 hours, the Filter Reset light will illuminate.
Switch the Local Air Conditioner OFF and carefully remove filters from the unit and clean. Replace
filters and press the Filter Reset button, the Filter Reset light will turn off and the operation time will
be cleared.
FAN SPEED CONTROL
4 settings: High, Medium, Low and Auto.
Note: Auto fan speed can be selected in cooling mode only.
(8) (7) (6)
turns the unit on and off. When the unit is plugged into an appropriate
(5) (4)
5) Timer / Temperature Set Controls
6) Mode Control
7) Timer Control
8) Sleep Control
EN 7
(3) (2)
(1)