Sherwood CDC-5506 Manual Del Usuario página 15

CDC-5506 (G)_ENG_110817:CDC-5506(E)_ENG 2011-08-17 오
3.
Repeat the above step 2 until the desired tracks
/files are programmed.
4.
Start program play.
or
• Play starts in the programmed order.
Checking the programmed tracks/files
• Each time the PROGRAM button is pressed in the
program mode, the programmed tracks/files are displayed
in the programmed order.
PROGRAM
Clearing the programmed tracks/files
■To clear on by one
• Each time the STOP(
program mode, the programmed tracks/files are cleared
one by one in the opposite order.
or
or
) button is pressed in the
5:36 페이지 15
■To clear all programmed tracks/files
• Press the STOP( ) button for more than 4 seconds in
the program mode.
• Opening the disc tray or selecting the other playback
source clears all programmed tracks/files, too.
■To clear a specific track/file
• Find the desired track/file and clear it in the program
mode.
PROGRAM
or
Rectifying any wrong programmed
track/file
Example :
When track 5, 9 and 7 are programmed and you want to
replace track 9 with track 10 on an Audio CD.
1.
Find track(/file) 9 in the program mode.
PROGRAM
or
PROG
1 2 3 4 5
• Then the programmed track(/file) is displayed for several
seconds.
15
TRACK
STEP